About

About RC Car Entertainment

We are a Calgary shop that fits and diagnoses vehicle electronics — audio, phone integration, dash cameras, remote starters, lighting, and the wiring behind all of it. The equipment matters. How it goes into your vehicle matters more.

Calgary automotive electronics

Twelve-volt and accessory work, at our northeast Calgary shop.

AMVIC licensed

Licensed with the Alberta Motor Vehicle Industry Council.

Lifetime warranty on the installation

If something we installed develops a fault, bring it back.

Vehicle-specific integration

Wiring and parts chosen for your year, make and model.

Who we are

A shop for everything that goes into a car after the factory

RC Car Entertainment is an automotive electronics and accessory installation shop in northeast Calgary. We are not a general mechanical repair shop, and — despite the name — we have nothing to do with remote-control hobby cars. The work here is the electrical and electronic side of a real vehicle: sound systems, phone integration, cameras, starters, lighting, and the power, ground and data connections that make all of it behave as though it came that way.

Most of what we do is installation and diagnosis on vehicles people already own. Some customers arrive knowing exactly which product they want. More arrive describing something else entirely — sound that has gone flat, a camera that keeps recording while the car is parked, a vehicle that is warm before they walk out to it in February — and we work out what actually fits that vehicle before anything is ordered or opened up.

Car audio installation bay at RC Car Entertainment in northeast Calgary

The installation standard

The install is the part you cannot see

Whichever service brought you here, the part you are actually paying for is the same: getting equipment into a vehicle so that it works, keeps working, and looks like it belongs. None of that is visible in a photograph, which is the awkward thing about this trade.

Technician Installing Car Audio System with Blue Gloves and Tools Nearby
  • Wiring chosen and routed for your specific vehicle, not a generic loom.
  • Power taken from an appropriate source, with correct fuse protection.
  • A proper ground, made to a point intended to carry it.
  • Factory features kept working — steering wheel controls, locking, screens.
  • Cable run behind trim and headliner, clear of pedals, seat rails and moving panels.
  • Trim removed and refitted without marks, gaps or broken clips.
  • Configured and tested with you in the bay before you take the vehicle.
  • Left serviceable, so the next person to open it up can follow the work.

How we approach a job

We would rather find the fault than replace the part

A lot of the work that comes through the door is not a fresh install. It is a system someone else fitted that never worked properly, an accessory that stopped working after a battery change, or a fault that three parts have already been thrown at. So we measure first. Replacing a component that was never broken is the expensive way to be wrong.

The same thinking applies to new work. Two vehicles can take the same equipment and still be different jobs — one interior gives you a seam to hide a cable in and the other does not, one needs an interface module and the other does not. Where the honest answer is that something will not work well on your vehicle, we would rather say so at the quoting stage than after the dash is apart.

Vehicle fuse panel and factory wiring looms exposed under a dashboard during electrical diagnosis

Equipment you already own

Bringing your own gear

We can fit many customer-supplied products, once we have confirmed the product suits your vehicle and the installation. Bring the gear and we will fit it properly.

The installation carries our workmanship warranty; the equipment itself carries whatever warranty the manufacturer gave you. If what you have bought is not a sensible match for the vehicle — the wrong size, the wrong power, something that will fight the factory system — we will tell you before we start rather than after. Tell us the vehicle and what you have, and we will confirm whether it fits before you book.

The shop

Northeast Calgary, off 38 Street

We work out of a unit in northeast Calgary, close to the airport industrial area, and customers come to us from across the city and the surrounding towns. Vehicles are worked on indoors, which matters here — a lot of this work is wiring behind trim, and January in Alberta is not the place to do it on a driveway.

Address#129 10985 38 St NE
Calgary, AB T3N 1Z2
HoursMonday to Saturday
10:30 a.m. – 6:30 p.m.
Closed Sunday
Sleeved wiring loom routed and secured with clips behind a vehicle trim panel

Getting started

How a project starts

  1. 01

    Tell us the vehicle and the goal

    Year, make and model, and what you want to change. A description of the problem is just as useful as a product name.

  2. 02

    We confirm what actually fits

    What your vehicle will take, which options are worth it, what each one involves, and the price before anything is opened up.

  3. 03

    Installation

    Booked to the vehicle and the job, done indoors, wired to the standard above.

  4. 04

    Testing and handover

    We check it with you in the bay and show you how to use it before you drive away.

Questions

About the shop

Do you sell or repair remote-control cars?

No. Despite the name, RC Car Entertainment is an automotive electronics and installation shop — we work on real vehicles, fitting and diagnosing audio, phone integration, cameras, remote starters, lighting and twelve-volt wiring.

Do you do general mechanical repair?

No. We stay on the electrical and accessory side of the vehicle. If a fault turns out to be mechanical, we will tell you what we found so you can take it to the right shop.

Can I supply my own equipment?

Often, yes. Tell us the vehicle and what you have bought and we will confirm whether it suits the vehicle before you book. The installation carries our workmanship warranty; the equipment keeps its own manufacturer warranty.

Do you warranty your work?

Our installation workmanship carries a lifetime warranty — if something we installed develops a fault, bring it back and we will fix it, for as long as you own the vehicle. The equipment itself is covered by its manufacturer's warranty, whose length and terms vary by product.

Are you licensed?

Yes — RC Car Entertainment is an AMVIC licensed business, licensed with the Alberta Motor Vehicle Industry Council.

Will this affect my vehicle's factory warranty?

We integrate with the factory wiring rather than cutting into it wherever the vehicle allows. Warranty terms are between you and your manufacturer, so if that is a concern, check your own warranty documentation and ask us how we intend to install on your vehicle.

How long does a job take?

It depends on the vehicle and the work — some jobs are a few hours, others are booked to the vehicle for longer. We will tell you what to expect when we quote, rather than after you arrive.

Do I need an appointment?

Booking ahead is best, especially in remote starter season. You can book online, call the shop, or send us the details and we will come back to you.

Tell us the vehicle and what you want to change

We will tell you what fits, what it involves and what it costs — before anything is opened up.